Congratulations! You have arrived! Now that you have completed the course lets see what you remember! You have two attemts at passing the course with an 80% or above to receive your Certificate of Achievement!
Good Luck!
0 of 15 Questions completed
Questions:
You have already completed the test before. Hence you can not start it again.
Test is loading…
You must sign in or sign up to start the test.
You must first complete the following:
0 of 15 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Uh oh, it looks like you didn’t get the required 80% passing score. Please take a few minutes to review the material and try again. Remember, you only have two attempts at this exam before you have to retake the course.
Congratulations! You have passed the course and will receive a certificate of completion!
Before operating an aerial platform:
After you have successfully entered the a boom lift’s basket:
Avoid operating an aerial platform around energized power lines.
Use the “high speed” setting on the lift whenever possible.
Who can operate aerial platforms?
Never operate the aerial platform:
It isn’t necessary to make sure the lift is on a level surface before raising the platform.
Never tie-off a safety harness to an outside source (steel beam, roof, pole, etc.) when operating an aerial platform lift.
An inspection of an aerial platform must be done:
It is OK to use your boom to push the aerial platform along the ground.
In the event that the aerial platform requires mechanical, electrical or hydraulic maintenance:
The manufacturer’s Operator’s Manual is:
The capacity of a boom lift basket/deck:
If you cannot determine the capacity of the lift, refer to the Operator’s Manual
You should take a walking inspection of the work site before each shift to note special conditions which may affect aerial platform operation.