Turnbuckle Usage

Do not shock load.
All loads must be in line with the turnbuckle body.
Secure turnbuckles to prevent unscrewing of the body or end components.
Do not allow contact with any obstruction that may bend or damage the turnbuckle.
End fitting threads must fully engage the threads in the turnbuckle body.
Ensure pipe body threads are fully engaged.
Always use a properly sized wrench when adjusting turnbuckles. Do not use pliers when adjusting a turnbuckle.
If locking nuts are used they must be compatible with the turnbuckle end threads.
Do not side load turnbuckles.
Do not drag turnbuckles on an abrasive surface.
All associated components, such as; cotter pins, bolts, pins, and/or nuts used with jaw ends must be suitable for use.